Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | UA |
Model Number : | RF-350A |
Certification : | CE |
Price : | Negotiable |
Payment Terms : | T/T |
Supply Ability : | 25 units per month |
Delivery Time : | 5-30 days |
RF 350A Wave Soldering Machine For SMT Assembly Line PCB Lead Free
RF-350A Wave Soldering Machine For SMT Assembly Line
Basic Information of Wave Soldering Machine RF-350A
Model | RF-350A |
Spraying System | |
Spraying Pressure | 0.25MPa ~ 0.4MPa |
Preheating Model | IR tube Option : Hot Air Convection |
Exhaust Method | Upper Exhaust |
Preheating Temp. | Room Temperature : ~300C |
No. of Preheating Zones | 3 |
Exhaust Capacity | 25M3/min |
Auto Flux Feeding | Optional |
Warm Time | Approx. 20/min |
Preheating Length | 1800 MM |
Flux Flow | Flux Flow meter |
Transmission Method | Air cylinder |
Conveyor System | |
Componet Clearance (mm ) | 130 MM |
Conveyor Direction | Optional |
Conveyor Height | 750 MM |
Conveyor Angle | 4 ~ 6 C |
PCB Width ( L x W ) | 350 MM |
Conveyor Width Adjustment | Manual |
Information of Wave soldering machine
Heating system
◆ Porous plate heater is used as the infrared heating source and
the far infrared light penetration is used to directly heat the PCB
, thus avoiding the problem of insufficient heating capacity in
traditional full hot air mode.
◆ Composite heating, mainly by infrared heating, supplemented by
hot air convection, can improve
heating capacity and uniform heating.
◆ High temperature hot air motor is imported from Sanyue (Taiwan).
The heating wire is nickel winding
and its service life is greatly improved.
◆ Modular pull-out design facilitates operator maintenance
Welding sysytem
◆ 4mm SUS316L imported stainless steel bladder, new type of bladder
design, beautiful appearance, easy cleaning, cast iron heating
plate, no deformation of the bladder
◆ Adjustable peak width to minimize tin oxidation, removable
without removing the nozzle
◆ The position of impeller shaft increases the oxidation shield and
reduces the tin oxide produced by the rotation of impeller shaft.
◆ The impeller shaft and peak motor parts can be separately removed
without removing the tin track (other brand peak welding can not do
this design).
◆ Tin slag oxidation: using 200*200 mm PCB plate as test plate and
calculating at 300 pcs per hour, the amount of tin slag produced in
10 hours is 2KG
Pictures display
Packing method of Wave Soldering Machine
![]() |